The BSOD or Blue Screen of Death error typically appears after a crucial Windows system crash. So, BSOD error is bad news to all Windows users but you can bypass it easily. Additionally, you can take some proven measures to prevent BSOD errors from happening in the first place.

Thus, you can reduce the chances of your system crashing. Furthermore, your Windows system will run more efficiently and smoothly. Let’s check out all the potential solutions along with reasons for Blue Screen of Death errors.

How to Fix the Blue Screen of Death

Laptop Repair Near Me confirms that specific Windows stop codes appear whenever a Blue Screen of Death error pops up on a PC. Among all Windows stop codes, the following ones are more common:

  • PAGE_FAULT_IN_NONPAGED_AREA
  • VIDEO_TDR_TIMEOUT_DETECTED
  • CRITICAL_PROCESS_DIED
  • SYSTEM_SERVICE_EXCEPTION
  • NTFS_FILE_SYSTEM
  • DPC_WATCHDOG_VIOLATION
  • IRQL_NOT_LESS_OR_EQUAL
  • SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  • DATA_BUS_ERROR

What causes a BSOD error on a Windows system? Typically, the following reasons are to blame for a failing Windows system:

  • Ageing hardware
  • Damaged or inappropriately installed hardware
  • Overheating
  • Infection triggered by malware, spyware, etc.
  • Incompatible or buggy software
  • Corrupted driver updates and so on

Let’s figure out how you can work on your Windows laptop to eliminate the BSOD error and prevent it from happening.

1. Turn off Your Device and Remove its Peripherals

Press the power button to turn off your Windows PC. If that doesn’t work, hold the Power button until your display blacks out. After that, you should disconnect all the peripherals from your device. Just keep your mouse and keyboard plugged into the Windows PC.

2. Reboot Your PC in Safe Mode

Restart your laptop by pressing the Power button. Now, follow the steps below to enter Safe Mode:

  • Click the Windows icon and search for msconfig.
  • Next, hit the Enter key and you will see the System Configuration page to open up.
  • Afterwards, get into to the Boot tab.
  • Check the box next to Safe  Boot under the column named Boot Options.
  • Select the Minimal setting.

Check if the BSOD error appears. If it does, turn off your Windows device and restart it in Safe Mode again. Long-press the F8 key as soon as your PC boots up. Keep following the on-screen guidelines to switch to Safe Mode.

3. Get Rid of Recently Installed Applications

Experts from a laptop service near me confirm that booting your PC in Safe Mode runs only essential programs. Now, you can uninstall problematic programs that you have installed recently. Check out how you can uninstall programs on your Windows device:

  • Hit the Start button.
  • Next, search for ‘add or remove programs’ and hit the Enter key.
  • Look for the recently installed application you need to remove.
  • Then, hit the Uninstall option.

Make sure you don’t uninstall any important programs or applications.

4. Roll Back Drivers

Chances are that a specific driver issue has caused a BSOD error. So, you can roll back a problematic driver and fix the problem. Here’s what you can do:

  • Make your way to Device Manager on your Windows laptop.
  • Now, right-click on the specific display adapter and choose Properties.
  • Land on the Driver tab and choose ‘Roll Back Driver’.

Click on OK and check if the BSOD error returns upon restarting your device.

5. Run a System File Checker Scan

Corrupted system files might induce a Blue Screen of Death error. So, you can run an SFC scan to ensure that there’s no issue with the file system. Here’s how you can execute an SFC scan:

  • Open Command Prompt with admin rights.
  • Afterwards, type ‘sfc/scannow’ and hit Enter.

Wait for a while and let the scan be completed. 

6. Scan Your System for Malware

Process disruption and corrupted files are 2 potential damage that malware can cause to your Windows laptop. As a consequence, you may notice a BSOD error. So, run a security scan using an antivirus solution. As an alternative, you can scan your device for malware and viruses using Windows Defender Firewall.

7. Examine Your Hard Drive

A CHKDSK scan is necessary to find file system errors, hard drive issues, etc. Now, follow the instructions to perform a CHKDSK scan:

  • Run Command Prompt with admin rights.
  • After that, type the following command: chkdsk.
  • Hit Enter to execute the command.

8. Inspect Your PC’s RAM

A BSOD error may occur if your PC encounters a problem with the RAM unit. Run the Windows Memory Diagnostic tool to test the RAM functioning. Here’s what you can do to check your PC’s RAM:

  • Hit the Windows key from your keyboard.
  • Search for Windows Memory Diagnostic and hit Enter.
  • Next, click the option that says, ‘Restart now and check for problems’.

Your laptop will show up the diagnostics results as soon as the device restarts. View these results in the Event Viewer if you want to see those results later.

9. Restart Your Laptop

Now, you should check if the Blue Screen of Death error has been eradicated. You can reinstall the latest version of the uninstalled software from a legitimate source. Restarting your device should update all the required drivers.

Make sure that you clean your laptop regularly. Consistent clutter can prevent your laptop from smooth functioning. Additionally, keep checking for OS updates to secure your machine against BSOD errors.

10. Reinstall Windows

Have you tried everything and still the BSOD error appears on the PC screen? Then, you should reinstall Windows. Reinstalling the operating system will delete all the stored data. However, reinstalling your Windows is challenging and you must back up your data for safety measures.

What if Nothing Works…

Chances are that your Windows PC has encountered a severe hardware failure. In that case, you must opt for an expert intervention. Get in touch with Laptop Repair Dubai to get convenient solutions.