Electric water heater provide hot water. That’s why they are the most essential appliance in your home. To keep your water heater working well, maintain it properly. This way, it will last a long time. 

Regular maintenance can help your water heater run better. This way, you can also save money on costly repairs. 

This blog post explains how to effectively maintain your water heater using a standard process.

Major Components of the Water Heater:

You can be aware of the critical components of the water heater. Such as:

• Heating Elements: Most electric water heaters have two elements. They are usually located at the top and bottom of the tank. After connecting the electric supply, both elements produce heat.
• Thermostat: The thermostat controls water temperature. It turns on or off to maintain the set level.
• Rod: You can see the aluminum or copper rod in the water heater; it provides a protective layer.
• Tank: The water tank is one of the main components of the water heater. It contains the water and generates heat after connecting to the electricity.

How Does The Water Heater Work?

The electric water heater uses electrical resistance. When you turn on the tap, cold water flows in through the pipes. The tank then heats the water using the heating element. This cycle continues to work when it comes into contact with electricity.

Comprehensive Guide for Maintaining Your Electric Water Heater:

Inspection Part:

Inspection plays a very essential role in fixing and detecting any kind of issues. The user needs to perform a visual inspection, where the user can check for the major signs of the leakages.

If they see any leaks, they should call a professional water heater repair service. The expert will find the problem. They will check for loose connections, a faulty tank, or other issues.

Check the temperature and pressure level of the water tank. If a valve isn’t working, the temperature maintenance depends on the pressure. Inspect major components annually or monthly, including:

Rod:

Diagnose the rod well. Carbon makes it slow, so your water heater uses more electricity and heats water poorly.

Check the Flush:

The flushing element helps prevent overheating. It also removes sediments from the water tank. Additionally, flushing improves the efficiency of the water tank. But you need to understand the inspection procedure for the flush.

To check your flush, follow these steps:

• Power Off Your Water Heater: You need to switch off your water heater at the electrical outlet.
• Close the Water Valve: You need to shut down the water supply from the tank.
• Open Drain Value: You must open the drain valve and allow the water to flow.
• Flush Tank: If your water tank is empty again, turn on the cold water supply and it will assist you in flushing out.
• Close the drain valve: Once you’ve finished flushing, remove the hose and turn the water supply back on.

If you can’t complete the flushing procedure, call a reliable water heater repair service for assistance.

Check the Thermostat:

Check the whole thermostat control. This helps you understand energy use better. To inspect the thermostat effectively, follow the instructions provided.

• Set Normal Temperature: We recommend setting your water heater to about 49°C. This gives you enough hot water and saves energy.
• Check the Water Temperature: Make sure the water temperature is accurate. If it’s not, adjust your thermostat settings.

If you aren’t getting enough hot water during the inspection, it needs a closer look. You should hire a professional water heater repair service.

Inspect the Tank & Pipes:

Inspect the insulated pipes on a regular basis, as they are responsible for both hot and cold water flow. If you find any loose connections, tighten or repair them immediately. This not only helps to keep water from freezing on colder days, but it also assures a steady hot water supply. Furthermore, disregarding these concerns can result in expensive energy bills. Consider contacting professional water heater services in Dubai to ensure that everything is properly installed and maintained.

Inspect the Anode Rod:

If you are listening to a cracking or popping noise from the water heater, then your anode rod is generating a fault. It attracts the corrosive elements that help to maintain the hot and cold water supply. If you wish to maintain an anode rod, check the given instructions.

• Turn Off Your Water Supply: First, unplug the tank from the outlet. Then, disconnect the water supply.
• Access Anode Rod: You must locate the anode rod and try to remove it carefully. You need to use the wrench to unplug it from the water heater.
• Inspect the Corrosion: You need to check for the signs of corrosion and replace them with new ones.
• Reinstall the Anode Rod: You need to inspect the rod and install it properly.

Check out the Common Problems:

If you are not getting hot water from the water heater, you need to inspect the items presented below:

• Power supply: You need to ensure that your power supply is correct and also inspect the power outlet.
• Thermostat settings: Check that you have set the right temperature for hot water. Then, try resetting your thermostat.
• Heating elements: You need to inspect the faulty heating elements in the water heater.
• Check the cracks: You need to check the visible cracks and physical damage. If you have found them, then you need to replace them.
• Check connection: Check all the nuts and bolts. If you find loose connections, repair them.

If you can’t check the common problems, contact a professional electric water heater repair service. They can help fix any issues with your water heater.

No Hot Water:

If you’re not getting hot water, check the following:

• Power Supply: Ensure the power to the water heater is on. Check if the circuit breaker has tripped.
• Thermostat Setting: Verify that the thermostat is set to the correct temperature.
• Heating Elements: Faulty heating elements may need replacement. Test them for continuity and replace if necessary.
• Leaking Tank: A leaking tank could or show a serious problem.
• Check for Cracks: Inspect the tank for visible cracks or damage. If the tank is cracked, it may need to be replaced.
• Inspect Connections: Tighten any loose connections. If the leak persists, consult a professional plumber.

Conclusion:

It is very important to maintain your water heater to make sure it is working effectively. Regular monthly inspections can reduce problems and save on repair costs. All electric water heaters are built using complex algorithms. Plus, only skilled technicians should handle their maintenance.

If you can’t maintain your water heater, contact 045490503 for repair service.